Enmet CP-60 Manuel d'utilisateur télécharger pdf (Page 13)

CP-60 ENMET Corporation

5.0 Maintenance

The CP-60

has no specific preventative maintenance requirements. Entering the maintenance menu, as outlined in Section 5.2

may change instrument configurations.

5.1 Cleaning Instructions

AUTION

: Never spray a cleaning solution on the surfaces of the CP-60.

Clean the exterior of the CP-60 enclosure with a mild soap solution on a clean, damp cloth. Do not soak the cloth with solution

so that moisture drips onto, or lingers on, external surfaces.

Under no circumstances should organic solvents such as paint thinner be used to clean instrument surfaces.

5.2 Maintenance Menu CP-60

The maintenance menu diagram is shown in Figure 8 Maintenance Menu Flow Chart. From the operational display, press

the OPTION switch until; "Enter MAINTENANCE Menu" is displayed.

Figure 8: CP-60 Maintenance Menu Flow Chart

O = Press Option

S = Press Select

Note: When in maintenance

mode the “_” indicates

the location of the cursor,

the “I” block indicates a

non-used location.

MAINTENANCE MENU

Exit maint menu

Press OPTION to return to top of maintenance menu.

Press SELECT to return to operational menu.

See Section 5.3.8 for instructions on how to exit Maintenance Menus.

To/Fro m

Operatio nal

Dis play

From Operational Menu

Press OPTION

MAINTENANCE MENU

Set New Password

Password

XXXX

Changes digit indicated by underscore cursor

Locks underscored digit and move s cursor to next digit

See Section 5.3.7

for changing password instructions.

MAINTENANCE MENU

Set Alarm1

Ala rm 1

Select: XX

Press OPTION until the gas alarm to be Set is displayed

See Section 5.2.2 for setting alarms instructions.

Alarm 2

Select: XX

MAINTENANCE MENU

Set Alarm2

Press

PTION until the gas alarm to be Set is displayed

See Section 5.2.2 for setting alarms instructions.

MAINTENANCE MENU

Set Alarm Delays

Alarm Delay

Select: XX

Press

PTION until the gas alarm delay to be Set is displayed

See Section 5.2.3 for setting alarms instructions.

MAINTENANCE MENU

Configure Alarms

Ch 1, 2, 3

R1 L

Pressing

PTION changes letter indicated by underscore cursor

See Section 5.2.4 for configuring relay instructions.

MAINTENANCE MENU

Relay Failsafes

R:1 Failsa fe ON

Pressing OPTION changes Failsafe setting from ON to OFF

See Section 5.2.5 for configuring relay failsafe instructions.

MAINTENANCE MENU

mA Output Span

Select: (Gas)

Press OPTION until the gas span to be Set is displayed

See Section 5.2.6 for output span instructions.

Enter Password

0000

Changes digit indicated by underscore cursor

Locks underscored digit and moves cursor to next digit

(6)

Val

Invalid

Enter Maint Menu

Press OPTION until gas to be Set-Up is displayed

See Section 5.2.1 for transmitter set-up instructions.

Scale mA Xmtrs

Select (Gas)

MAINTENANCE MENU

Scale mA Xmtrs

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 22 23

Commentaires sur ces manuels

Pas de commentaire

Enmet CP-60 Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Enmet CP-60