Enmet OMNI-4000 Manuel d'utilisateur Page 44

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 72
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 43
ENMET Corporation OMNI-4000 S/N 6705 and above
38
Selecting the Type of Gas for the Explosive Gas Channel, Channel 1.
Twenty-seven (27) explosive gases are preprogrammed and can be selected and displayed. See the FIGURE 3-4.
Also, a gas known as "Other" can be given a multiplier coefficient by the operator. Proceed as follows:
After Enable is selected, the present gas is displayed
Press the MENU switch repeatedly to view the list of 27 gases presented one-by-one on the display
If the desired gas is not the "Other" gas, press the ENTER switch to select the gas and go to the "Setting An Alarm
Threshold for the Explosive Gas Channel".
Figure 3-4: Table of Gases, Associated Parameters and Coefficients
List of pre-programmed gases and vapors. The coefficients are given relative to methane.
Gas LEL UEL
Vapor
Density
Coefficient CH4
Ethyl acetate 2.1% 11.5% 3.0 1.35
Acetone 2.15% 13% 2.1 1.25
Acetylene 1.5% 100% 0.9 1.1
Butane 1.5% 8.5% 2.0 1.60
1,3 – Butadiene 1.4% 16.3% 1.85 1.25
2 – Butanone 1.8% 11.5% 2.5 1.5
Dimethylether 3.0% 27.0% 1.6 1.55
Ethanol 3.3% 19.0% 1.6 1.1
Ethylene 2.7% 37.0% 0.98 1.2
Natural gas 5.0% 15.0% 0.55 1.05
Hexane 1.2% 7.4% 3.0 1.6
Hydrogen 4.0% 75.6% 0.069 0.55
Isobutane 1.5%
1.5%
2.0 1.6
Isopropanol 2.15% 13.5% 2.1 1.6
Methane 5.0% 15.0% 0.55% 1.0
Ethylene oxide 2.6% 100% 1.5 2.1
Propylene oxide 2.3% ? 2.0 2.0
Pentane 1.4% 8.0% 2.5 1.7
Propane 2.0% 9.5% 1.6 1.3
Propylene 2.0% 11.7% 1.5 1.1
Gasoline, 95 octane 1.1%
6%
3 to 4 2.4
Toluene 1.2% 7.0% 3.1 2.2
Xylene 1.0% 7.6% 3.7 2.6
Diesel 0.6%
6.0
> 4 5.0
Methanol 5.5% 44.0% 1.1 0.8
Kerosene(JP4) 0.7% 5.0% > 4 7.5
Octane 1.0% 6.0% 3.9 1.7
Vue de la page 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 71 72

Commentaires sur ces manuels

Pas de commentaire